Columbia River Basalt Stratigraphy in Oregon -- Table of Geologic Units for Site WA 472857119354001

Skip to data USGS Site ID: Site identification number permanently assigned to the well by the U.S. Geological Survey and recorded in National Water Information System (NWIS), a national computer database maintained by U.S. Geological Survey. Well location: The system used for locating wells is based on the rectangular system for subdivision of public land. The State is divided into 36 square mile townships numbered according to their location relative to the east-west Willamette baseline and a north-south Willamette meridian. The position of a township is given by its north-south "Township" position relative to the baseline and its east-west "Range" position relative to the meridian. Each township is divided into 36 sections approximately 1-square-mile (640-acre) in area and numbered from 1 to 36. For example, a well designated as 01S/03E-33DCA is located in Township 1 south, Range 3 east, section 33. The letters following the section number correspond to the location within the section; the first letter (D) identifies the quarter section (160 acres); the second letter (C) identifies the quarter-quarter section (40 acres); and the third letter (A) identifies the quarter-quarter-quarter section (10 acres). Thus, well 33DCA is located in the NE quarter of the SW quarter of the SE quarter of section 33. Sorted on this item. Sequence Number: Sequence number assigned to identify a record. Depth to Top of Interval: The depth to the top of this unit, in feet below land surface. Depth to Bottom of Interval: The depth to the bottom of this unit, in feet below land surface. This field should be specified for all units, except the last one in the hole. Unit code: The name of aquifer or geologic unit stored by the U.S. Geological Survey in National Water Information System (NWIS), a national computer database maintained by U.S. Geological Survey. Lithology code: The principal lithology of this unit stored by the U.S. Geological Survey in National Water Information System (NWIS), a national computer database maintained by U.S. Geological Survey. Description of material: The adjective modifier to describe the rock type. --, no data/unknown.
USGS Site ID	Well location	Sequence Number	Depth to Top of Interval	Depth to Bottom of Interval	Unit code	Lithology code	Description of material
472857119354001	23N/26E-20D01	1	25	--	GRANDE RONDE BASALT OF YAKIMA	Basalt	--

Skip to data

USGS Site ID: Site identification number permanently assigned to the well by the U.S. Geological Survey and recorded in National Water Information System (NWIS), a national computer database maintained by U.S. Geological Survey.

Well location: The system used for locating wells is based on the rectangular system for subdivision of public land. The State is divided into 36 square mile townships numbered according to their location relative to the east-west Willamette baseline and a north-south Willamette meridian. The position of a township is given by its north-south "Township" position relative to the baseline and its east-west "Range" position relative to the meridian. Each township is divided into 36 sections approximately 1-square-mile (640-acre) in area and numbered from 1 to 36. For example, a well designated as 01S/03E-33DCA is located in Township 1 south, Range 3 east, section 33. The letters following the section number correspond to the location within the section; the first letter (D) identifies the quarter section (160 acres); the second letter (C) identifies the quarter-quarter section (40 acres); and the third letter (A) identifies the quarter-quarter-quarter section (10 acres). Thus, well 33DCA is located in the NE quarter of the SW quarter of the SE quarter of section 33. Sorted on this item.

Sequence Number: Sequence number assigned to identify a record.

Depth to Top of Interval: The depth to the top of this unit, in feet below land surface.

Depth to Bottom of Interval: The depth to the bottom of this unit, in feet below land surface. This field should be specified for all units, except the last one in the hole.

Unit code: The name of aquifer or geologic unit stored by the U.S. Geological Survey in National Water Information System (NWIS), a national computer database maintained by U.S. Geological Survey.

Lithology code: The principal lithology of this unit stored by the U.S. Geological Survey in National Water Information System (NWIS), a national computer database maintained by U.S. Geological Survey.

Description of material: The adjective modifier to describe the rock type.

--, no data/unknown.

USGS Site ID

Well location

Sequence Number

Depth to Top of Interval

Depth to Bottom of Interval

Unit code

Lithology code

Description of material

472857119354001

23N/26E-20D01

GRANDE RONDE BASALT OF YAKIMA

Basalt

Accessibility FOIA Privacy Policies and Notices

U.S. Department of the Interior | U.S. Geological Survey
URL: https://or.water.usgs.gov/projs_dir/crbg/data/wells/wa_472857119354001/wa_472857119354001_geol.html
Page Contact Information: Oregon Webteam
Page Last Modified: Wednesday, 09-Jan-2013 18:50:50 EST


Columbia River Basalt Group Stratigraphy Home Page Oregon Water Science Center Studies Page Oregon Water Science Center Home Page

Columbia River Basalt Stratigraphy in Oregon

In Cooperation with the Oregon Water Resources Department (OWRD)

Table of Geologic Units for Site WA 472857119354001